"Jessica", "Elizabeth & Rod", "Mia" woodblock prints -- this is what each 11 x 16 inch sheet looked like before the individual prints were cut out. This particular sheet was left uncut, but was signed and numbered 24/24 after the image above was scanned.

 

The 16 blocks carved for the prints. Each block is 1/4" plywood with a cherry veneer and each is 12 x 16 inches with registration notches (kento) carved into the lower right corner and just left of center on each block. The blocks are very flexible, so I hold them absolutely flat on my printing table using a special vacuum plenum I made for the purpose. The blocks above are laid out in the following order from block 1 (lightest color) to block 16 (darkest color):

16	12	8	4
15	11	7	3
14	10	6	2
13	9	5	1